How to Measure

  • Diagram of Measuring Panel Glide Blinds

    Diagram of Measuring Panel Glide Blinds

How to Measure

  • Diagram of measuring the width

    1 Measuring the width - A

    Measure the exact outside width of your window frame.

  • Diagram of measuring the drop

    2 Measuring the drop - B

    Measure the height of your window frame from the top to where you’d like your blind to finish.

    For windows off the ground it’s a good idea to finish 50-100mm below the bottom of the frame to allow for total clearance.

    For full length windows it’s a good idea to measure to 10mm off the floor.

  • Diagram of measuring either side of the window

    3 Measuring either side of the window - C

    Because our Panel Glide blinds come in set widths, you will need to add a balancing measure to each side of the window. Remember to make note of clearance at either side of the window. Because the panels come in either 600mm or 800mm it’s a good idea to leave 300-600mm the side in which you intend to have them stack when open.

Essential Measuring Tips

  1. Always use a metal tape measure
  2. Always write down your measurements indicating which is width and drop. Take extra care to ensure you don’t reverse them.
  3. Double check all your measurements. We don’t refund or replace items due to inaccurate measurements.
  4. There is no need to shorten your measurement to allow for clearance. We’ll take that into account. All we need from you is the exact measurement.
  5. We require all measurements in millimeters.
  6. Measure every window, as they may have slight variations that will effect your window furnishing from fitting perfectly.
  7. If you have any questions don’t hesitate calling us on 1300 918 390 between 9am and 9pm Mon to Fri or 10am to 5pm Sat & Sun. Our customer service team is more then happy to help.

Our Promise