Getting started
1-2 people
less than 5 mins
What you'll need to measure
- your tape measure (metal is best)
- your step ladder
- a pen and some paper
Before you get going
Choose between cord and cleat, cord lock and chain drive.
'Normal' for us means between 600 mm and 3000 mm wide, and 1200 mm to 3000 mm high. If your window is wider than 3000 mm jump across to our linked blinds, which can span up to 12 metres.
Our roman blinds attach to most surfaces, though it's always best to do your homework. Wooden window frames and wall studs are by far the easiest to attach to.
Designing your dream roman blinds
The fun starts with designing how your Roman blinds will fit, so channel your inner stylist and get creative! This is about finding your dream look and getting custom blinds that fit and function perfectly.
Roman blinds that sit outside the frame are called face fit
OK it's time to start measuring - Outside of the frame
Let's take it step by step
Measuring up is easy; we just need to know three things: your width and your drop measurements, and which side you'd like your cord or chain on. Here's how to do it:
Measure Your Width
Measure the exact outside width of your window frame across the top, and write it down.
Then then add 40 mm - 100 mm each side of the architrave. This will help reduce the gap at the side of the blind, providing better light control and more privacy. This measurement will be your blind width.
Example: your window width measures 1810 mm. You'll add 200 mm, and then give us 2010 mm.
Measure your drop
A
Measure the height of your window frame from the top of the frame down to where you’d like the blind to finish, and write it down.
We recommend that you add 100 mm - 150 mm to the drop of the blind so you can mount the blind above the architrave. This will allow the entire window to be visible when the roman blind is fully raised, allowing for maximum light.
Example: the drop you'd like measures 1200 mm. You'll add 100 mm, and then write down 1300 mm.
B
For shorter drop window’s we recommend that you take the blind 50 mm - 100 mm below the sill. Watch for any obstructions such as a desk or bed.
C
For full length windows we recommend that you measure to 10 mm off the floor. This will give enough clearance and allow the blind to have room to settle overtime. For drops over 2410mm we recommend a 30mm clearance from the floor.
Make a note of which side you'd like your cord or chain to be on. Think about which side is easiest to reach, obstruction free and where the cord or chain will be least visible.
Our hints and tips
Want to know our top tips for measuring up like a pro?
Ready to install?
How to install roman blinds
View step by step guide for how to install roman blinds with a chain drive or how to install roman blinds with a cord & cleat.
