There will always be a small gap between the blinds when it comes to corner windows, however there are ways to minimise the light and vision.

  • Achieving Privacy

    Have A to B (the blind running all the way through) covering the front window to achieve the most privacy, to stop vision down the gap between the butting blind.

    Position the gap to minimise the light coming in or in a way to make the gap less obvious when entering the room.

Measuring Your Windows

  • Measuring A to B

    Measure the first blind A to B into the corner without making any deductions.

  • Measuring C to D

    When measuring C to D it is important to subtract the projection depth from the blind to obtain the proper ordering width. You will be ordering the finished blind size.

    The distance/projection depth to be subtracted will depend on the type of product. See product projection depth below.

Product Projection Depth

  • Roller Blind Standard - 80mm
  • Roller Blind Heavy Duty - 95mm
  • Double Roller Blind - 140mm
  • Slimline Double Roller Blind - 100mm
  • 63mm Venetian Blind - 75mm
  • 50mm Venetian Blind - 65mm
  • 25mm Venetian Blind - 35mm
  • Vertical Blind - 100mm
  • Roman Blind 40mm Headboard - 45mm

Essential Measuring Tips

  • If you have any questions don’t hesitate to call us on 1300 918 390
  • For help deciding on a fit, email a photo of you window(s) to
  • Use metal tape measure
  • Provide measurements in millimetres
  • Double check all of your measurements
  • Specify width and drop when writing your measurements to ensure you don’t reverse them
  • Only provide the exact measurements, do not make deductions to allow clearance
  • Measure every window as they may have slight variations that will prevent your blinds from fitting perfectly

Have a question? We’re here to help
1300 918 390

Mon to Fri 8am - 6pm & Sat 10am - 3pm