How to measure Pelmets

A pelmet is an optional decorative accessory which hides the brackets and roller hardware. There are two finish options:

• Metal - Powder coated fascia with matching plastic returns
• Fabric wrapped - Coated with your chosen fabric wrapped around the valance

A: Height Our pelmets are made to heights of either 100mm or 120mm

B: Projection This is standard based on the height you choose

C: Width Measure the width from the outer edge of the architrave to the opposite edge

• If you have any questions don’t hesitate to call us on 1300 918 390
• For help deciding on a fit, email a photo of you window(s) to info@diyblinds.com.au
• Use metal tape measure
• Provide measurements in millimetres
• Double check all of your measurements
• Specify width and drop when writing your measurements to ensure you don’t reverse them
• Only provide the exact measurements, do not make deductions to allow clearance
• Measure every window as they may have slight variations that will prevent your blinds from fitting perfectly